2003 ICC ANSI A117.1 PDF

Trademarks: “ICC,” the International Code Council logo and “Accessible and Usable Buildings and Facilities (ICC/ANSI Al )” are trademarks of the. The edition of ANSI Standard A presented the first criteria for requirements and identify changes from the edition. . ICC/ANSI A ICCANSIAAccessible and Useable Buildings and Facilities-The specifications in this standard make sites, facilities, buildings and elements accessible.

Author: Dunris Tygot
Country: Burundi
Language: English (Spanish)
Genre: Business
Published (Last): 5 January 2006
Pages: 434
PDF File Size: 6.23 Mb
ePub File Size: 12.43 Mb
ISBN: 884-8-74112-936-4
Downloads: 74326
Price: Free* [*Free Regsitration Required]
Uploader: Shaktikus

If provided, thresholds at doorways shall be V 2 inch 13 mm maximum in height.

ICC/ANSI A – Accessible and Useable Buildings and Facilities

Inside handrails on switchback or dogleg stairs or ramps shall be continuous between flights or runs. Where any obstruction within 1 8 inches mm of the latch side of a doorway projects more than 8 inches mm beyond the face of the door, measured perpendicular to the face of the door, maneuvering clearances for a forward approach shall be provided.

This standard is not included in any 203.

A turning space shall comply with Section These accessible elements are used for designing accessible functional spaces such as classrooms, hotel rooms, lobbies or offices.

The minimum area of a wheelchair accessible compartment for primarily children’s use shall be 60 inches 1 mm min- imum in width measured perpendicular to the side wall, and 59 inches mm minimum in a Below Grab Bar depth for wall hung and floor mounted water clos- ets measured perpendicular to the rear wall.

A turning space com- plying with Section shall be provided within the room. Curb ramps and the flared sides of curb ramps shall be located so they do not project into vehicular traffic lanes, parking spaces, or park- ing access aisles.


Where speech synthesis cannot be sup- ported, dynamic alphabetic output shall not be required to be audible. Compartment doors shall not swing into the required absi area of the compartment.

State Building Code – ICC/ANSI A Code Interpretations

Application and Administration Definitions Toe clearance shall be permitted to extend 25 inches mm maxi- mum under 203 element. Changes in level shall comply with Section Visible signal fix- tures shall be centered at 72 inches mm minimum above the floor.

Accessible water closets and toilet compartments shall comply with Section Car control buttons with floor designations shall be raised or flush, and shall comply with Section Receivers required to be hearing aid compatible shall interface with telecoils in hearing aids through the provision of neck loops. Please first log in with a verified email before subscribing aa117.1 alerts.

Access aisles serving vehicle pull-up spaces shall be 60 inches mm minimum in width. Continuous handrails at the inside turn of stairs and iccc.

A parallel approach complying with Section shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided. Detectable warnings shall be 24 inches mm minimum in the direction of travel and extend the full width of the curb ramp or flush surface. You can download and open this file to your own computer 203 DRM prevents opening this file on another computer, including a networked ifc.


Write a customer ucc. Elevator car controls shall comply with Sections Access aisles shall be 20 feet mm minimum in length. The clear floor space adjacent to the control switch shall be located beyond the arc of the door swing. Detectable warning sur- faces shall have truncated domes complying with Section Where in-car signals are provided they shall be visible from the floor area adjacent to the hall call buttons.

Stair treads shall comply with Section and shall have a slope not steeper than 1: Learn more about Amazon Giveaway.

2003 ICC Accessible and Usable Buildings and Facilities

Wheelchair spaces and wheel chair space locations in assembly areas with spectator seating shall comply with Section Objects on multiple posts or pylons where the clear distance between the posts or pylons is greater than 1 2 inches mm shall have the low- est edge of such object either 27 inches mm maximum or 80 inches mm minimum above the floor.

In alterations, full extensions of handrails shall not be required where such exten- sions would be hazardous due to plan con- figuration. Characters shall be sans serif. The signal shall be an automatic verbal annunciator that announces the floor at which the car is about to stop.