ICC ANSL A117.1-2003 PDF

Trademarks: “ICC,” the International Code Council logo and “Accessible and Usable Buildings and Facilities (ICC/ANSI Al )” are trademarks of the. This Accessible and Usable Buildings and Facilities (ICC Al) is a The edition of ANSI Standard A presented the first criteria for accessibil. Major changes/additions from ICC ANSI A – found in the edition of A 1. ICC ANSI. A – Section. ICC ANSI A –

Author: Faegis Voodoozshura
Country: Moldova, Republic of
Language: English (Spanish)
Genre: Technology
Published (Last): 5 January 2005
Pages: 406
PDF File Size: 19.65 Mb
ePub File Size: 14.52 Mb
ISBN: 932-9-82597-696-2
Downloads: 88434
Price: Free* [*Free Regsitration Required]
Uploader: Nikom

Destination-oriented elevators shall be provided with visible and audible signals to indicate which car is responding to a call. A clearance around a water closet 60 inches mm minimum, measured per- pendicular from the sidewall, and 56 inches mm minimum, measured perpendicular from the rear wall, shall be provided.

Space beneath an element between 9 inches mm and 27 inches mm above the floor shall be considered knee clearance and shall comply with Section Doors shall not swing into the clear floor space or clearance for any fixture.

ANSI A117.1 (2003): Accessible and Usable Buildings and Facilities

Telephones shall have push button controls where service for such equipment is available. Where a tactile sign is provided at double doors with two active leaves, the sign shall be to the right of the right-hand door. Text descriptors shall comply with Sections Indicators shall be located above the car control panel or above the door. Braille shall be below the cor- responding text. An eleva- tor system that provides lobby controls for the selec- tion of destination floors, lobby indicators designating which elevator to board, and a car indi- cator designating the floors at which the car will stop.


A parallel approach shall be permitted at wet bars.

Transfer-type shower compartments shall have a clear inside dimension of 36 inches mm in width and 36 inches mm in depth, measured at the center point of opposing sides.

The number Five key shall have a single raised dot. For infor- mation onpermission to copy material exceeding fair use, please contact: The audio output from an internal speaker shall be at 75 dBA minimum at 18 inches mm with a maxi- mum distortion of 10 percent.

Dispens- ers shall not be of a type that control delivery, or do not allow a11.1-2003 paper flow. Mirrors located above lavatories, sinks or counters shall be mounted with the asl edge of absl reflecting surface 40 inches 1 01 5 mm maximum above the floor. Where signs indi- cate that elevators do not serve all landings, signs in tactile characters complying with Section A clear floor space com- plying with Section shall be provided in front of the machine.

The outlet of the dis- penser shall be 15 inches mm minimum and 48 inches 1 mm maximum above the floor, and shall not be located behind the grab bars. The highest operable part of a117.1-20033 two-way communication system shall a117.1-0203 with Section Curb ramps and the flared sides of curb ramps shall be located so they do not project into vehicular traffic lanes, parking spaces, or park- ing access aisles.

The centerline of the water closet shall be 16 inches mm minimum to 18 inches mm maxi- mum from the side wall or partition.


ICC/ANSI A – Accessible and Useable Buildings and Facilities

Destination-ori- ented elevators shall provide car identification in tactile characters complying with Section Accessible stairs shall comply with Section Clear floor spaces, clearances at fixtures, and turning spaces shall be permitted to overlap. In trans- fer-type and alternate roll-in-type showers, the ahsl shall extend along the seat wall to a point within qnsl inches 75 mm of the compartment entry.

An exterior pathway with a prepared surface for pedestrian use. Speech output for any single function shall be permitted to be automatically interrupted when a transaction is selected. Audible signals shall have a frequency of Hz maximum.

The cross slope of a walking surface shall not be steeper than 1: The turning space shall be a circular space with a inch mm minimum diameter. Landings subject to wet conditions shall be designed to prevent the accu- mulation of water.

Where such island or cut-through median is less than 48 a117.12003 mm in depth, a b Fig.

Existing elevators shall be permitted to have recessed call buttons. Floors shall be designated An exterior or interior way of pas- sage from one place to another for pedestrians. In existing buildings or facilities, ramps shall be permitted to have slopes steeper than 1: